Autobiography 10-in-1 Multifunction Machine
Autobiography 10-in-1 Multifunction Machine
SKU:Autobiography
VAT not included
Couldn't load pickup availability
The Alvi Prague Autobiography 10-in-1 machine combines aesthetic treatments in a single device, saving space and time, and improving the quality of beauty salons.
The Autobiography 10-in-1 beauty machine is compact, features a touchscreen, and ten storage compartments for manicures. Designed to sit on a table in a beauty salon.
It is designed to perform the following treatments:
- Diamond dermabrasion
- Ultrasonic cleaning
- Cold/heat therapy
- Needle-free mesotherapy
- Microcurrents
- Phototherapy
- Non-invasive carboxytherapy
- Ultrasound treatment
- Galvanotherapy.
The device effectively treats facial and body skin, including delicate areas such as the lips, underarms, décolletage, and bikini area. Let's analyze the Autobiography device's control functions separately.
Diamond dermabrasion. Peeling is performed with a small abrasive wheel and diamond grains of varying sizes. Mechanical peeling is gentle and does not cause irritation or burns, unlike chemical peels. After cleansing, the skin feels fresh and clean, similar to that of a child. This procedure not only cleanses impurities from the skin but also smooths acne scars and marks. The exfoliated particles are instantly removed by a quiet vacuum pump integrated into the handpiece. At the same time, the rotating diamond disc gently massages the skin and stimulates blood flow and metabolic processes.
Ultrasonic peeling is a gentler cleansing treatment, indicated for low-oil and low-contamination skin. It is often used in preparation for more drastic measures to treat problematic skin. Ultrasonic peeling eliminates any damage (burns, bruises), which cannot be completely avoided with mechanical and chemical peels.
Cold and heat therapy. This cosmetic combination allows you to influence the skin with artificially generated heat (up to +55°C) and cold (down to 0°C). These procedures are often used as an adjunct to other types of treatments. The thermal nozzle warms the skin before cleansing or mesotherapy; cold soothes the skin after invasive procedures, relieves swelling and microbruises, and helps tighten pores.
Needle-free mesotherapy is well known to all regular beauty salon visitors. Electroporation is a noninvasive technique that allows for drug administration without injections, temporarily increasing the permeability of cell membranes by 400 times. This allows for the injection of complex substances such as hyaluronic acid and peptides.
Microcurrents involve the application of very low-power electrical impulses to the skin. These impulses are completely imperceptible to the patient, but they work successfully at the molecular level, increasing the performance of cell membranes. Microcurrents are essential in anti-aging therapy and for working with sensitive skin.
Phototherapy is a noninvasive treatment of problem areas of the skin using light of a specific or variable wavelength. The procedure promotes skin rejuvenation, accelerates tissue regeneration, and stimulates collagen synthesis.
Carboxytherapy: This type of physiotherapy uses carbon dioxide. It is injected into the tissues percutaneously, resulting from a chemical reaction of citric acid and sodium carbonate that takes place on the surface. The components, along with a special gel, are supplied in sets. The effect is twofold. Saturating the tissues with CO2 dramatically increases metabolic processes, eliminating artificial "asphyxiation." The foam formed on the skin as a result of the reaction performs a cleansing function.
Ultrasound treatment. Sound waves with a frequency of over 20 MHz have a beneficial effect on the dermis and soft tissues. The waves contribute to the harmonious structuring of intercellular fluid, the activation of blood and lymph flow, and the improvement of local immunity.
Galvanotherapy not only has a local effect but also a systemic one, healing the body as a whole. A solution of chemicals necessary for the body is delivered to the treatment area. Under the influence of a weak current, the desired ions penetrate the tissues and blood vessels and are successfully distributed throughout the body.
Functions of the electroporation machine |
vacuum diamond microdermabrasion; ultrasonic peeling; ultrasonic phonophoresis; heat therapy; cryotherapy; phototherapy; non-invasive carboxytherapy; vibratory massage; microcurrent therapy; galvanization; iontophoresis; descaling |
Features of needle-free mesotherapy |
|
Amperage |
0.2-30 ma |
Current impact frequency |
2.5-5 kHz |
Number of exposure intensity settings |
9 |
Features of needle-free mesotherapy |
|
Minimum/maximum vacuum value |
1-72 cmHg |
Grinding degree |
9 diamond nozzles of different diameters and grain sizes |
Number of vacuum intensity settings |
10 |
Features of ultrasonic spatula |
|
Ultrasonic vibration frequency |
1÷3 MHz |
Number of ultrasonic signal amplitude settings |
20 |
Number of ultrasonic frequency settings |
20 |
Features of ultrasonic spatula |
|
Frequency |
27÷28kHz |
Operating modes |
2 |
Number of ultrasonic spatula vibration amplitude settings |
20 |
Number of ultrasonic spatula frequency settings |
20 |
Characteristics of heat-cold therapy |
|
Warm-cold maniple |
maximum heating surface temperature: 50 ± 1°C; minimum cooling surface temperature: ≤ 0°C; work surface diameter: 29.4 mm. |
Characteristics of phototherapy |
|
light spectrum |
462 nm (blue); |
Number of brightness settings |
10 |
Characteristics of carboxytherapy |
|
The frequency of the mechanical vibrations created by the handle. |
300 Hz |
Number of exposure intensity settings |
10 |
Features of microcurrent therapy |
|
Number of operating modes |
4 modes |
Microcurrent therapy working modes |
reprogramming of mimic muscles; microiontophoresis; face, neck, body lift; lymphatic drainage |
Current strength |
10-750 uA |
The shape of the impact signal pulses |
triangular bipolar |
Pulse frequency of the impact signal |
1-300Hz |
Number of exposure intensity settings |
15 |
Characteristics of galvanization |
|
Electroplating output voltage |
1-30V |
Electroplating output current |
up to 6.5 mA |
Number of exposure intensity settings |
10 |
Machine Configuration |
|
Network parameters |
220-240 V / 50 Hz |
Energy consumption |
65 W or less |
protection class |
IP31 |
Dimensions of the device (net) |
476*306*200 mm |
Dimensions of the device (gross) |
520*370*380 mm |
Weight (net) |
12.95 kg |
Weight (gross) |
15 kg |
Share




